Not sure where the idea to make an indoor Hop Scotch came from (somewhere on the internet), but I knew I needed to make one for my niece.
Materials Used:
Craft Felt
Acrylic Paint
Non-slip Shelf Liner
Scrap Fabric and beans, for Bean Bags
Directions:
Plan out the layout.
Paint numbers on each of the rectangles. I had to paint three to four coats on each.
Sew together; take #3 and #4, put right sides together and sew middle seam. Do the same with #6 and #7.
Next, take #2 and overlap the bottom edge 1/2" on top of the top edge of #1, sew together.
Take #3/4 and overlap the bottom edge 1/2" on top of the top edge of #2, sew together.
Take #5 and underlap the bottom edge 1/2" underneath of the top edge of #3/4, sew together.
Take #6/7 and overlap the bottom edge 1/2" on top of the top edge of #5, sew together.
Take #8 and underlap the bottom edge 1/2" underneath the top edge of #6/7, sew together.
Pin Non-slip Shelf liner on the backside starting at #1, up to #8. Sew the together along the outside edge. Trim excess. Measure and cut additional rectangles to sew to the back side of the outer edges of #6, 7, 3 and 4.
Bean Bags: Using scrap material cut four, 4" squares, sew three sides, fill with 1/4 cup beans, sew fourth side.
No comments:
Post a Comment